Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Alabama

Oil Stain Removal in Alabama

Lifting oil, grease and fluid stains from driveways, garage floors and parking areas. Typical cost $100-$300.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Oil Stain Removal in Alabama brings it back, usually in a single visit.

How we clean it

Degreaser and hot-water pressure washCleaning method

When to book oil stain removal

  • Dark oil spots where cars park
  • Grease near grills and dumpsters
  • Transmission or brake fluid stains

Why it gets dirty

  • Vehicle leaks
  • Cooking grease
  • Spilled fuel and fluids

Easy upkeep between cleanings

  • Blot fresh spills with cat litter or absorbent
  • Don't spread them with water
  • Fix the leak

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Spreading oil into a larger stain
  • Oily water going into storm drains
  • Deep, old stains may lighten but not disappear completely

Our process for oil stain removal

  1. Apply a degreaser and let it dwell
  2. Agitate
  3. Clean with hot water where available
  4. Recover or control wash water
  5. Repeat on stubborn spots

How much does oil stain removal cost?

$100-$300Typical range for typical driveway oil spots
1-2 hoursTypical time on site
As neededRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Local oil stain removal for Alabama

Rust stains from sprinklers fed by well water are common in Alabama, along with tannin stains from leaves and the dark film mildew leaves on concrete.

Red clay soil is common in parts of Alabama. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.

We cover 215 cities and towns across Alabama. Find oil stain removal in your city:

Oil Stain Removal: frequently asked questions

How much does oil stain removal cost in Alabama?

Oil Stain Removal typically costs $100-$300 for typical driveway oil spots, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for oil stain removal?

Oil Stain Removal is usually done with degreaser and hot-water pressure wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is oil stain removal safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule oil stain removal?

As needed. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Alabama

Driveway Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $150-$400

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Patio Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$400

Solar Panel Cleaning

Gentle solar panel cleaning with soft brushes and purified water, never pressure washing.

Typical $150-$350

Fence Cleaning for Vinyl Fencing

Soft wash. White vinyl fencing shows green algae, mildew and sprinkler stains quickly.

Typical $200-$600

Commercial Pressure Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $400-$2,000

House Washing

A full exterior wash of siding, trim, soffits and eaves that removes dirt, cobwebs, mildew and algae.

Typical $300-$700

Exterior Mold & Mildew Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$700

House Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$700

House Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$700

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Deck Restoration & Staining for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $800-$2,500

Ready for a cleaner home or business?

Get a free pressure washing quote in Alabama. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote